 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SDT600 DC Input Optocoupler DESCRIPTION The SDT600 consists of a phototransistor optically coupled to a light emitting diode. Optical coupling between the input LED and output phototransistor allows for high isolation levels while maintaining low-level DC signal control capability. The SDT600 provides an optically isolated method of controlling many interface applications such as telecommunications, industrial control and instrumentation circuitry. FEATURES APPLICATIONS * * * * * High input-to-output isolation package (5000 Vrms) Low input power consumption High stability 6 Pin DIP Package w/output Base Connection CTR range 50-600% * * * * * * Switch mode power supplies Copiers, registers, vending machines Computer terminals, PLCs Telecom / Datacom Home appliances Digital logic inputs OPTIONS/SUFFIXES* ABSOLUTE MAXIMUM RATINGS* PARAMETER Storage Temperature Operating Temperature Continuous Input Current Transient Input Current Reverse Input Control Voltage Output Power Dissipation UNIT C C mA A V mW MIN -55 -40 TYP MAX 125 100 50 1 6 500 * * * -H -S -TR .04" (10.16mm) lead spacing option (VDE0884) Surface Mount Leadform Option Tape and Reel Option NOTE: Suffixes listed above are not included in marking on device for part number identification. SCHEMATIC DIAGRAM 1 2 3 4 5 6 1. Anode 2. Cathode 3. NC 4. Emitter 5. Collector 6. Base *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. APPROVALS * * UL C-UL Approved, File # E201932 VDE Approved, Lic 40011227 (c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 1 of 6 SDT600 rev 1.40 (10/25/2004) SDT600 DC Input Optocoupler ELECTRICAL CHARACTERISTICS - 25C PARAMETER INPUT SPECIFICATIONS Forward Voltage Reverse Current V A 1.2 1.4 10 If = 20mA Vr = 4V UNIT MIN TYP MAX TEST CONDITIONS OUTPUT SPECIFICATIONS Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Dark Current Floating Capacitance Saturation Voltage Current Transfer Ratio Rise Time Fall Time V V A pF V % s s 60 5 4 0.6 0.1 60 6 0.1 1 0.3 600 Ic = 10uA Ie = 10uA Vce = 20V V = 0V, f=1.0MHz If = 20mA, Ic = 1mA If = 2mA, Vce = 5V Ic = 2mA, Vcc = 5V, Rc = 100 ohms Ic = 2mA, Vcc = 5V, Rc = 100 ohms COUPLED SPECIFICATIONS Isolation Voltage Isolation Resistance V G 5000 50 T = 1 minute CTR CLASSIFICATION -A -B -C -D -E % % % % % 60 130 200 300 60 160 260 400 600 600 (c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 2 of 6 SDT600 rev 1.40 (10/25/2004) SDT600 DC Input Optocoupler PERFORMANCE DATA SDT600 Collector-Emitter Saturation Voltage vs. Forward Current N = 100, Ambient Temperature = 25C SDT600 Current Transfer Ratio vs. Forward Current N = 100, Ambient Temperature = 25C Collector-emitter Saturation Voltage Vce (V) Current transfer ratio CTR (%) Forward Current IF (mA) Forward Current IF (mA) SDT600 Collector Power Dissipation vs. Ambient Temperature N = 100 SDT600 Collector Dark Current vs. Ambient Temperature N = 100 Collector Power Dissipation Pc (mW) Collector Dark Current Iceo (A) Ambient Temperature Ta (C) Ambient Temperature Ta (C) SDT600 Typical Vceo Distribution N = 100, Ambient Temperature = 25C SDT600 Forward Current vs. Ambient Temperature N = 100, Ambient Temperature = 25C 30 20 10 0 60 63 66 69 72 75 78 81 Breakdow n Voltage (V) Forward Current IF (mA) 40 Device Count Ambient Temperature Ta (C) (c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 3 of 6 SDT600 rev 1.40 (10/25/2004) SDT600 DC Input Optocoupler PERFORMANCE DATA SDT600 Collector Current vs. Collector-Emitter Voltage N = 100, Ambient Temperature = 25C SDT600 Forward Current vs. Forward Voltage N = 100, Ambient Temperature = 25C Collector Current Ic (mA) Collector-emitter Voltage VCE (V) Forward Current IF (mA) Forward Voltage VF (V) SDT600 Rise Time vs. Load Resistance N = 100, Ambient Termperature = 25C SDT600 Fall Time vs. Load Resistance N = 100, Ambient Temperature = 25C Response Rise Time (us) Load Resistance RL(K ohm) Response Rise Time (us) Load Resistance RL(K ohm) (c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 4 of 6 SDT600 rev 1.40 (10/25/2004) SDT600 DC Input Optocoupler MECHANICAL DIMENSIONS (in mm) 6 PIN DUAL IN-LINE PACKAGE (SDT600) 6PIN SURFACE MOUNT DEVICE (SDT600-S) TOLERANCE :+ 0.25mm 6 PIN H TYPE WITH 0.4" LEAD SPACING (SDT600-H) (c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 5 of 6 SDT400 rev 1.40 (10/25/2004) SDT600 DC Input Optocoupler DISCLAIMER Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. (c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 6 of 6 SDT600 rev 1.40 (10/25/2004) |
Price & Availability of SDT600
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |